Found 95 Results  |   Page 1 of 4

BT9ts

Features:

  • Data Tracked: Tilt (Cycle Count/Duration), Asset ID, Battery
  • Operating Temperature: -40°C to +70°C
  • Sealing: IP67
  • …

DOWNLOAD SPEC SHEET
Contact Us About This Product

BT28i

Features:

  • Data Tracked: Asset ID, Battery, Hours
  • Operating Temperature: -40°C to +70°C
  • Sealing: IP67
  • …

DOWNLOAD SPEC SHEET
Contact Us About This Product

MG16 Handle

Features:

  • Contact Ratings: 5A 250 VAC or 2A 30 VDC
  • Push Buttons: SPST
  • Rocker Switch: SPTST N.O. (Maintained or momentary)
  • …

Download FREE Datasheet
Contact Us About This Product
Customize This Product

JS9 Multi-Axis Controller

Features:

  • Factory programmable output: proportional within 0-10V, ratiometric or absolute configuration (Two additional digital outputs per axis-programmable on/off position relative to handle travel)
  • Short circuit and reverse polarity protection protection provided on board
  • Operating temperature is -40°C to +70°C, storage temperature is -40°C to +90°C
  • …

MG1 Handle

Features:

  • Contact Ratings: 5A 250 VAC or 2A 30 VDC
  • Push Buttons: SPST
  • Rocker Switch: SPTST N.O. (Maintained or momentary)
  • …

Download FREE Datasheet
Contact Us About This Product
Customize This Product

MG25 Handle

Features:

  • Contact Ratings: 5A 250 VAC or 2A 30 VDC
  • Push Buttons: SPST
  • Rocker Switch: SPTST N.O. (Maintained or momentary)
  • …

Download FREE Datasheet
Contact Us About This Product
Customize This Product

S9 Micro-Controller

Features:

  • 3 Available Knob Styles: Paddle (toggle), Wheel, Rocker
  • Mechanical Life: 5 million cycles
  • Travel Angle: 25° each direction
  • …

Download FREE Datasheet
Contact Us About This Product
Customize This Product

RG Rocker Grip

Features:

  • The rocker actuated switches are type V3 contacts with a rating of 10 amps @ 24 VDC or 125VAC
  • It can be used as a control handle on manual hydraulic valves with electric accessories
  • …

Download FREE Datasheet
Contact Us About This Product
Customize This Product

MG24 Handle

Features:

  • Contact Ratings: 5A 250 VAC or 2A 30 VDC
  • Push Buttons: SPST
  • Rocker Switch: SPTST N.O. (Maintained or momentary)
  • …

Download FREE Datasheet
Contact Us About This Product
Customize This Product

OCI-2 Input Module

Features:

  • On-machine adjustability and troubleshooting – no external device or computer needed
  • Compact and economical – spread modules out instead of running cable
  • Versatile – factory programmable I/O designation (input vs. output, sink vs. source)
  • …

UFO9 Driver Board

Features:

  • Pulse Width Modulation: Helps overcome effects that inhibit valve operation
  • Threshold Adjustment and Maximum Output Adjustment
  • Diagnostic Light Emitting Diodes
  • …

Download FREE Datasheet
Contact Us About This Product
Customize This Product

BT21i

Features:

  • Data Tracked: Asset ID, Battery, Hours
  • Operating Temperature: -40°C to +70°C
  • Sealing: IP67
  • …

DOWNLOAD SPEC SHEET
Contact Us About This Product

BT41p Pump Tracker

Features:

  • Data Captured: Fuel/Fluid dispensed, Asset ID, CMH (cumulative machine hours), and Location
  • Operating Temperature: -40°C to +70°C
  • Sealing: IP65
  • …

DOWNLOAD SPEC SHEET
Contact Us About This Product

JS10 Micro-Controller

Features:

  • Variety of knobs available with limited extra function knobs
  • Small yet rugged 2 axis controller
  • 1 million life cycle
  • …

MS6 Industrial Controller

Features:

  • Mechanical Life: over 1 million cycles
  • Operating Temperature: -40 to +70°C
  • Handle Deflection: 50° (center to full: 25°)
  • …

Download FREE Datasheet
Contact Us About This Product
Customize This Product

MG2 Handle

Features:

  • Contact Ratings: 5A 250 VAC or 2A 30 VDC
  • Push Buttons: SPST
  • Rocker Switch: SPTST N.O. (Maintained or momentary)
  • …

Download FREE Datasheet
Contact Us About This Product
Customize This Product

MS2 and MS5 Industrial Controllers

Features:

  • 3 Available Knob Styles: Paddle (toggle), Wheel or Rocker
  • Mechanical Life: over 1 million cycles
  • Operating Temperature: -40 to +70°C
  • …

Download FREE Datasheet
Contact Us About This Product
Customize This Product

MG26 Handle

Features:

  • Contact Ratings: 5A 250 VAC or 2A 30 VDC
  • Push Buttons: SPST
  • Rocker Switch: SPST N.O. (Maintained or momentary)
  • …

Download FREE Datasheet
Contact Us About This Product
Customize This Product

BT22m

Features:

  • Data Tracked: Asset ID, Battery, Hours
  • Operating Temperature: -40°C to +70°C
  • Sealing: IP67
  • …

DOWNLOAD SPEC SHEET
Contact Us About This Product

Dual Valve Driver Board

Features:

  • Power Supply: 9V-32V
  • Command Input: Either Potentiometer (10kΩ non-CT) or Voltage (0.5V to 4.5V)
  • Max Output Current: PWM: 4 Amps each; PDC: 3 Amps each
  • …

JV1 Industrial Controller

Features:

  • Designed as a throttle controller for shifting or park position in the Y axis
  • Factory programmable output: proportional within 0-10v, ratiometric or absolute configuration (Two additional digital outputs per axis – programmable on/off position relative to handle travel)
  • Short circuit and reverse polarity protection provided on board
  • …

MG15 Handle

Features:

  • Contact Ratings: 5A 250 VAC or 2A 30 VDC
  • Push Buttons: SPST
  • Rocker Switch: SPTST N.O. (Maintained or momentary)
  • …

Download FREE Datasheet
Contact Us About This Product
Customize This Product

BT52rs

Features:

  • Data Captured: Asset ID, Battery, Open/Close Counts
  • Operating Temperature: -40°C to +70°C
  • Sealing: IP67
  • …

DOWNLOAD SPEC SHEET
Contact Us About This Product

BT5vc Tag

Features:

  • Data Tracked: Asset ID, Battery, Hours
  • Operating Temperature: -30°C to +70°C
  • Sealing: IP67
  • …

Download FREE Datasheet
Contact Us About This Product
Customize This Product

BT53ts

Features:

  • Data Captured: Cycle Count/Duration, Asset ID, Battery
  • Operating Temperature: -40°C to +70°C
  • Sealing: IP67
  • …

DOWNLOAD SPEC SHEET
Contact Us About This Product
Page 1 of 4